PMS

The PMS creates a new field in saving energy using improvement electrical current. This is the first universal energy saving system capturing free electron and turning wasted energy into useful energy which improves the level of electrical resistance and reduces the resistance in conductors.

Power Saving System is a new product which saves energy based on the principle of reducing waste (heat) energy in conductors by injecting free electrons. It is well known in electrical engineering that the Resistance (R) is related to the resistivity (rho), length of cable (L) and its cross section (A) by the formula: R = (rho) x L/A

Feature of PMS

  • Reduces your total power consumption on (active and reactive loads) Without reducing voltage level.
  • Capable with different environmental situations
  • Reducing Total Harmonic Disturbance (THD).
  • Suitable for domestic, commercial and industrial power systems.
  • Only device at energy saving field which works at any level voltage (High Voltage, Medium Voltage, Low Voltage)
  • Only device that is made for both AC and DC power.
  • Reducing the maintenance and increasing life span of electrical equipment.
  • Easy to installation and small size and weight. Most installations are lPMS than one hour.
  • PMS is not an electricity consumer (power load of PMS is near zero)
  • Reducing of heat temperature of conductors and other electrical equipment.
  • PMS saving min of 10% and we had results at many power systems till 30% (old electrical system older than 40 year)

Three steps to reducing of power losses

1

First Step

First step which is shown in red color. This demonstrates state of electrons before the installation of PMS (Power Management System). In this regular sequence at most conductors movement of electrons are scattered and irregular. This causes more friction between electrons and more heat as well as power losses.

2

Second Step

Second Step which shown in white color. This is where PMS installed or connection point. PMS system is creating a Similar Electromagnetic field and is using the potential difference in electric conductors. This makes the electrons regulate and direct them to movement in a straight line. Streamlining the movement electrons (Transfer Electrical Energy).

3

Third Step

Third Step which shown in green color. This part is due to install of PMS system. Electrons in a wire or (any conductors) movement very organized and regular so the result is Reducing friction between electrons. This means reduction of heat in conductors, with reduction of heat in conductors we will have reduction of power losses factors in conductors.
Time (waiting period) or (acclimatization) for single-phase device is 5 to 10 day, a three-phase machine direction (LV) takes 15 to 30 days to acclimatize. In the apparatus ((MV) takes about 20 to 40 days to acclimatize

Advantages of PMS Installation

Reduces technical loss in any electricity system

Reduces power purchase without significant effect in sale

Reduces heat in power system

Increases life and efficiency of all electronic appliances

Easy to handle, install and maintain

Light weight and compact